The bridge cranes used in the workshop have various tonnages such as 10 tons, 32 tons, and 50 tons. A customer once said that the lifting capacity of the secondary hook of a 32/5-ton QD double-beam br[…]
In the production operation, due to the requirements of a certain production process, a certain object needs to be turned 90 degrees or 180 degrees in the air in order to complete a certain process. I[…]
After the electric hoist is added to the crane, the crane becomes a double electric hoist crane. The lifting capacity of the two electric hoists can be greater than the rated lifting capacity of the c[…]
Bridge crane is widely used in processing workshop, assembly workshop, metal machinery workshop, maintenance workshop, various warehouses and other occasions. It can also be used for auxiliary lifting[…]
Single beam crane is a small machine. If an accident occurs at high altitude, it will lose a lot. The operation of single beam crane is controlled by various controllers. Once the controller fails, it[…]
The LD single-beam crane is a widely used lifting equipment, and its electrical system is also a very key component. The editor of our factory will introduce the electrical system of the single-beam c[…]
In the past, all tonnage single-girder cranes belonged to special equipment and needed to be inspected by relevant units. However, cranes under 3 tons have been crossed out in the latest special equip[…]
Bridge cranes used in metallurgical applications are called double-beam metallurgical bridge cranes , which are more dangerous when using metallurgical cranes to lift molten steel. In this kind of ope[…]
The fetching and winding device of the electric wire rope hoist used by the crane is a wire rope, and the wire rope is one of the vulnerable parts of the electric hoist. Even if the wire rope is well […]
Before the crane is officially put into use, a load test must be carried out to determine the good performance of the various components of the crane. The purpose of the test is to check the correctne[…]
