For this tender information in Kazakhstan, you can verify the information on the Internet in China.

1. Project Overview and Bidding Scope
1.1 Project Overview: The project is located in Jiangbuer State, Kazakhstan, 500 kilometers from Almaty and about 800 kilometers from Horgos Port on the China-Kazakhstan border. The project content is to build a soda ash production plant with an annual output of 500,000 tons. The scope of the project includes supporting facilities such as soda ash process production area, brine mining area, limestone mining area and living residential area.
1.2 Bidding Scope: Procurement of lifting equipment and electric hoist equipment
2. Bidder Qualification Requirements
2.1 This bidding requires bidders to have various licenses such as production (manufacturing, operation, installation) licenses for corresponding equipment and performance of domestic and foreign projects of the same scale, and have the ability to undertake the supply of equipment for this bidding project in terms of personnel, equipment, funds, etc.
2.2 The bidder and its technical support party (if any) (hereinafter referred to as the "bidder") must be a legally registered corporate legal person and have the ability to perform civil liability within its legal business scope.
2.3 Two or more enterprises with the same legal representative, including the parent company, the whole (omitted) (omitted) (omitted) ( (omitted) ), shall not bid at the same time in the same goods bidding.
2.4 The bidder shall submit qualification documents proving its eligibility to participate in the bidding and its ability to perform the procurement contract after winning the bid as part of the bidding documents. If the bidder is a consortium, in addition to submitting the consortium agreement indicating the leading member of the consortium, each member of the consortium shall submit its own qualification documents separately, otherwise the bid will be rejected.
2.5 If the goods provided by the bidder are not manufactured by the enterprise, the bidder shall obtain the consent of the goods manufacturer and provide the manufacturer's authorization letter.
2.6 The bidder must have a complete ISO-9000 series quality management system and/or occupational safety and health management system, environmental management system certification.
2.7 The equipment bid must meet the technical performance and quality requirements specified in the second volume of the bidding documents "Technical Part". The bidder must provide technical support materials for the performance guarantee value (including but not limited to the type test report and/or appraisal report and/or performance acceptance test report and its certificate and other relevant appraisal materials issued by a nationally recognized or internationally recognized organization).
2.8 The main engine or key parts of the equipment reported by the bidder shall not be subcontracted or transferred. All subcontractors of the bidder must be confirmed by the tenderer and must be manufacturing enterprises (except standard parts or low-priced small parts). The bidder's subcontractors should have a complete quality management system and relevant certification certificates.
2.9 The bidder must have good bank credit and business reputation, and is not in a state of being ordered to stop business or having its property taken over, frozen, or bankrupt.
2.10 The bidder and its subcontractors must not have breached any contract in the past 5 years, nor have the contract been terminated due to the bidder or its subcontractors. The bidder and/or technical support party have no corruption or fraud as defined by the relevant national government departments.

3. Obtaining the bidding documents
CAMC will issue the electronic bidding documents uniformly on ** through the project bidding mailbox. Mailbox: *@*ttp://**.

4. Submission of bidding documents

4.1 Submission method of bidding documents: send the electronic bidding documents with password to the designated mailbox, and inform the password to open the bidding documents on the bid opening day. The email address is: *@*ttp://**. The deadline for bidding is 14:30 (time) on **. When sending the bidding documents, please indicate the names and telephone numbers of two password providers (one for use and one for backup) in the email.

4.2 The bidding documents that are delivered overdue or not delivered to the designated location will not be accepted by the tenderer.

5. Confirmation
After your unit receives this bidding invitation, please confirm it by email within 24 hours.

6. Contact information of the tenderer
Tenderer: Zhonggong (omitted)
Address: (omitted) Building A, No. 3 Danling Street, Haidian District
Postal code: *
Contact person: Zhang Guirong
Telephone: *
Email: *@*ttp://**

Single Girder Overhead Crane Price List (Reference)

Different types of cranes have unique features that make them suitable for specific industrial applications. By understanding the advantages and limitations of each type of crane, facility managers can choose the most appropriate crane for their operations. Here are some recommendations based on the information provided:

For facilities with limited floor space:

Overhead cranes

Gantry cranes

Workstation overhead cranes

For facilities that require frequent lifting and moving of loads in different areas:

Portable gantry cranes

For smaller industrial facilities with limited space:

Jib cranes

For facilities that need to move heavy loads quickly and accurately:

Overhead cranes

Gantry cranes

For facilities that require efficient and precise movement of loads within a specific workstation or area:

Workstation overhead cranes

It is important to note that each type of crane has limitations and may not be suitable for certain applications. For example, overhead cranes and gantry cranes may not be ideal for facilities with low ceilings environments. Jib cranes may not be suitable for facilities where loads must be moved over a long distance or to a high elevation. Portable gantry cranes may not be suitable for facilities where loads need to be moved over a long distance or to a high elevation, or where there is limited floor space. Workstation overhead cranes may not be suitable for facilities where loads need to be moved over a long distance or to a high elevation, or where there is limited overhead clearance.

Features Coil Lifting Tongs

Coil lifting tongs at your request

Airpes designs and manufactures heavy-duty coil lifting tongs for the most demanding customers all over the world. Our Airpes engineers can make a custom design and adapt every single vertical coil lifter to meet our customers’ requests. We will use the information they provide regarding mechanical features, electronic components, crane hook and hoist capacities, type of material to lift, available headroom, width and position, and as always meeting the highest of safety standards.

Airpes’ coil lifting tongs features

• Every coils lifter built in Airpes is a certificated design according to safety Directive 2006/42/CE (that replaced Directive 98/37/CE).
• We build every coil grab using laser cut plates, in S355 J2+N steel, steel tubes quality S355J2H hot rolled according EN-10210.
• We can incorporate additional electronic components and applications, like special hook configuration, frequency drive, PLC’s, Wi-Fi, GSM modem for communication among other components, applications and with Airpes technicians, from leading easy-to-find brands to spare parts all over the world.
• Integration of coil’s optional rotating system in the vertical axis for motorized coil rotation of the roll while you grab it.
• Weighing Capacity Systems to retrieve information of weight on every lift.
• Standard equipment: Frequency variator for each engine and a programmable PLC with a software that allows complete control of the hook.
• Special lighting system on board, to indicate progress and status from the coil tong

A. Single girder overhead crane

Single beam overhead crane configuration is made up of a single bridge girder, two end carriages and a hoist with trolley, which

runs along the bottom flange of the bridge girder between the end carriages.

* It is widely used in industrial factory, warehouse, workshop, stock ground, workstation factory, goods yard etc.

* It looks like bridge, because both ends of girder are on the tall concrete column and metal support structure.

* It consists of metal structure, crane travelling mechanism, lifting mechanism, safety protection and operation.

B.Double girder overhead crane

Double beam overhead crane configuration is made up of two bridge girders, two end carriages and a hoist with trolley. The hoist travels on top of rails that are mounted to the top of bridge girders. It is widely used for transferring material, goods equipment installation and maintenance in factory, power station, storeroom, warehouse etc.

PRODUCT DESCRIPTION

3 ton Portable mobile Gantry Crane

portable crane It is easy to move and disassemble, with 4 variable positioning wheels, two of which are locked with 90 degree angle direction.our light weight mobile crane is an idea auxiliary equipment for your warehouse.

Wear-resistant polyurethane wheels. Small rolling resistance, easy to move, safe and reliable Modularized design,beam and column bolted connection, easy installation.

3 ton Portable mobile Gantry Crane

Warehouse Material Lifting Motorized Travelling 5ton Gantry Crane Price

Warehouse material lifting motorized travelling 5ton gantry crane price is most popular type material lifting equipment for

workshop, warehouse material delivery, outdoor, construction, etc.

It consists of gantry frame, main beam, hoist, electric driven, universal and electrical box,etc.0.5-10Ton be complete designed and customized as per customer demands.

Main Feature:

1. Trackless driven device/hand push type

2. Adjustable lifting height

3. Remote control

Safety feature of the Light duty mini gantry:

Crane traveling limit switch

Weight overload protection device

Lifting height limit device

Voltage lower protection function

Phase sequence protection function

Emergency stop function

Rain cover for outside hoist, driving units, electrical cubicle.

Warning indicator: flashing lights and warning sound.

Wireless infra-detector for anti-collusion

Due to the wide variety of customized lifting equipment, which cannot be displayed one by one, please inform us of the technical parameters such as model, span, lifting height, operating length, and specific installation location in your message. We will make a quotation for you after accounting.

(The specification, price, payment method, and delivery date of the equipment are subject to the quotation!)

QC type 50/10t electromagnetic bridge crane Henan Nucleon Crane

Product Introduction

The walkway entrance into the control room is divided into end entry, side entry, and top entry;

When using the electromagnetic disk, the rotating part of the hook must be locked with screws, and rotation is not allowed;

3. The lifting weight includes the dead weight of the electromagnetic disk;

4. The total weight of the crane does not include the weight of the electromagnetic disk and its accessories;

5. The electric disk listed in the table is a reference model, and the weight absorption is the weight absorption capacity of this type of electromagnetic suction cup. Users can choose another one based on actual usage.

Due to the wide variety of customized lifting equipment, which cannot be displayed one by one, please inform us of the technical parameters such as model, span, lifting height, operating length, and specific installation location in your message. We will make a quotation for you after accounting.

(The specification, price, payment method, and delivery date of the equipment are subject to the quotation!)

QC type 50/10t electromagnetic bridge crane Henan Nucleon Crane

Product Introduction

The walkway entrance into the control room is divided into end entry, side entry, and top entry;

When using the electromagnetic disk, the rotating part of the hook must be locked with screws, and rotation is not allowed;

3. The lifting weight includes the dead weight of the electromagnetic disk;

4. The total weight of the crane does not include the weight of the electromagnetic disk and its accessories;

5. The electric disk listed in the table is a reference model, and the weight absorption is the weight absorption capacity of this type of electromagnetic suction cup. Users can choose another one based on actual usage.