HomeGaleri Kasus → HD type 2-ton overhead crane and 1-ton electric chain hoist sold to Sri Lanka in 2022

Derek overhead tipe HD 2 ton dan kerekan rantai listrik 1 ton dijual ke Sri Lanka pada tahun 2022

Parameter pengadaan kerekan rantai listrik

  • Order time: 2022.12.13
  • Kapasitas angkat: 1 ton
  • Tinggi angkat: 4 meter
  • Tegangan kerja: 400v / 50hz / 3p
  • Order content: 1 ton kerekan rantai listrik*2
  • Negara pengekspor: Sri Lanka

HD overhead crane procurement parameters

  • Order time: 2022.12.13
  • Kapasitas angkat: 2 ton
  • Lifting height: 4 m
  • Span: 4.88 m
  • Tegangan kerja: 400v / 50hz / 3p
  • Order content: HD 2 ton overhead crane
  • Exporting country: Sri Lanka

This is the order for overhead cranes and kerekan listrik sold to Sri Lanka in 2022. The customer purchased one HD type 2-ton overhead crane and two 1-ton electric chain hoists from our pabrik derek. The lifting height of the electric chain hoist is 4 meters, which is used to operate a dual speed electric hoist. The order was placed at the factory on November 11th, but due to the customer's payment not being received, production began on December 23rd after it was confirmed that the payment had been received. We will ship the product to Sri Lanka on February 28, 2023. The atlas shows some details of electric chain hoists and overhead cranes in the factory. If you want to learn more about overhead cranes and electric chain hoists, as well as the latest prices for 2 tons of overhead cranes, please hubungi kami.

HD Overhead Crane Introduction

HD crane is a kind of low headroom crane, usually used in factory workshops with low space height, which can effectively use the space height and increase the lifting height.

The HD electric single-girder crane is independently developed and designed on the basis of introducing advanced European design and manufacturing technology and combining the latest domestic standards such as GB3811-2008 and JB/T1306-2008. The appearance is beautiful, and the driving mechanism adopts KONE three-in-one reduktor (hard tooth surface reducer, frequency conversion brake motor), which is completely comparable to similar European products in terms of appearance and technical performance. Its superior performance is reflected in the mature application of modular design, frequency conversion speed regulation, automatic detection and other technologies, and various protection functions such as overload protection, overcurrent protection, and voltage loss protection make the electric single beam more perfect.

HD electric single-girder crane is suitable for working in the environment conditions of working level A3~A5, working environment temperature -25℃~+40℃, relative humidity ≤85% and no flammable, explosive or corrosive medium. The lifting capacity is 1-16 tons, and the span is 7.5-25.5 meters. The crane power supply is three-phase AC with a rated frequency of 50Hz or 60Hz. The rated voltage is 220V ~ 660V. The upper and lower limits of the allowable voltage fluctuation of the motor are ±10%, and the internal voltage loss of the crane is not more than 3%.

Apa itu kerekan rantai listrik

Kerekan rantai listrik ringan dan kecil alat pengangkat. Kerekan rantai listrik terdiri dari motor, mekanisme transmisi, dan sproket. Semua kerekan rantai listrik diproduksi sesuai dengan standar internasional, dan semua roda gigi internal dipadamkan pada suhu tinggi, yang meningkatkan ketahanan aus dan ketangguhan roda gigi, dan roda gigi sangat pas.

Kerekan rantai listrik umumnya memiliki kapasitas angkat 0,1-60 ton dan tinggi angkat 3-120 meter. Karakteristik kerekan rantai listrik: struktur kinerja canggih, ukuran kecil, ringan, kinerja andal, pengoperasian yang mudah, jangkauan aplikasi yang luas, Sangat nyaman untuk mengangkat benda berat, pekerjaan bongkar muat, peralatan pemeliharaan, dan mengangkat barang. Itu juga dapat dipasang pada balok-I yang ditangguhkan, trek melengkung, jib crane rel pemandu dan titik angkat tetap untuk mengangkat benda berat.

Kerekan rantai listrik memiliki berbagai aplikasi, terutama digunakan di pabrik-pabrik besar, gudang, pembangkit tenaga angin, logistik, dermaga, konstruksi dan industri lainnya, untuk mengangkat atau memuat dan menurunkan barang, dan juga dapat mengangkat benda berat untuk memudahkan pekerjaan atau perbaikan. mesin besar. Kerekan rantai listrik dioperasikan oleh operator di tanah dengan tombol, atau dapat dioperasikan di ruang kontrol atau berkabel (nirkabel) kontrol jarak jauh. Kerekan rantai listrik dapat digunakan untuk suspensi tetap, dan juga dapat digunakan dengan troli monorel listrik dan troli monorel dorong tangan / tarik tangan untuk berjalan.

Kasus derek overhead lainnya di Sri Lanka

Cara menyesuaikan Derek di Atas Kepala di Sri Lanka

Kami adalah produsen derek yang berlokasi di Cina, menyediakan layanan penyesuaian derek kepada pelanggan derek global. Jika Anda ingin menyesuaikan Derek di Atas Kepala, Anda dapat meninggalkan pesan di situs web atau Email: sales010@cranesdq.com, beri tahu kami informasi berikut, dan manajer penjualan kami akan menghubungi Anda:

  • Kapasitas angkat (ton):__?(Kapasitas terukur)
  • Tinggi angkat (m):__? (Tinggi dari hook pusat ke lantai)
  • Rentang (m):__? (Jarak antara pusat rel)
  • Kecepatan angkat (m / mnt):__? (Tunggal, Ganda, Variabel)
  • Jarak tempuh (m):__? (Panjang rel)
  • Tugas kerja:__? (Berapa jam sehari? Berapa kali dalam satu jam?)
  • Bahan apa yang akan diangkat:__?
  • Tegangan industri:__? ( seperti: 380V, 50Hz, 3ph )

Leave a Reply

Dilindungi dengan Cloud Daftar Hitam IPCloud Daftar Hitam IP

Kirimkan Kebutuhan Anda

    id_IDIndonesian
    %d