5 Ton Electric Wire Rope Hoist Specifications

Table of Contents

5 Ton Electric Wire Rope Hoist Specification			CD5-6
Hoisting capacity		ton	5
Lifting height		m	6
Hoisting speed CD1		m/min	8
Hoisting MD1		m/min	8/0.8
Traveling speed		m/min	20
Wire rope	Rope dia.	mm.	15
	specification		6×37-15
	Length	m	18
Rail track	I beam model GB706		25a—63c
Rail track	minimum radius of curvature	m	2
Power supply	Rated Voltage	volt	Three current phase 380V
Power supply	Rated frequency	Hz	50
Working system			JC25%
Joint Num.		Num./hour	120
Hoisting motor	type		ZD41-4
	Rated power	K.W	7.5
	Rated rev.	Rev. /min	1400
	Rated current	A	16.5
Traveling motor	type		ZDY21-4
	Rated power	K.W	0.8
	Rated rev.	Rev. /min	1380
	Rated current	A	2.2
5 Ton Electric Wire Rope Hoist Stationary A type total weight		Kg.	392
5 Ton Electric Wire Rope Hoist Electric trolley D type total weight		Kg.	482
Note: Hoisting height can be up to 9m, 12, 18m, 24m, 30m, etc. according to users’ require.

About 5 Ton Electric Wire Rope Hoist Specifications

When purchasing an 5 ton electric wire rope hoist, it is necessary to pay attention to the following key parameters:

Motor power size: Different electric hoists use different motor sizes, and even the same model of motor power may vary. When choosing, it is best to clarify the motor power and then choose a suitable one for your own use.
Lifting height issue: The lifting height of the wire rope electric hoist is determined based on the height of our own factory building. We need to transport the goods to the highest position, and we can choose the highest lifting height. Generally, the lifting height is 6 meters, 9 meters, 12 meters, etc., and even the longest height can be customized.
Phase number, lifting weight, lifting speed, operating speed, frequency: These parameters must be understood, and at the same time, it is necessary to understand the I-beam equipped by oneself to see if it meets the relevant requirements of I-beam. In addition, it is necessary to have an understanding of the model of the steel wire rope, the model of the I-beam track, and the small radius of the circular track.

The Other Electric Wire Rope Hoist Specifications

How to customize Electric Wire Rope Hoist from China

We are a crane manufacturer located in China, providing crane customization services to global crane customers. If you want to customize a electric hoist, you can leave a message on the website or Email: sales010@cranesdq.com , tell us the following information, and our sales manager will contact you: