We have completed 1 bridge crane installation project in باكستان, which includes 1 set of 10 طن رافعة علوية و 1 مجموعة من 20 طن رافعة علوية, all models are QZ double girder الاستيلاء على دلو رافعة علوية. All crane components are shipped from Qingdao Port in China to Qasim Port in Pakistan by sea after they are produced in the رافعة مصنع in China.
رفع القدرات |
t |
15 |
20 |
|
رفع الارتفاع |
م |
11.5 |
11.5 |
|
Span |
م |
15.75 |
15.75 |
|
السرعة |
Trolley traveling |
م/دقيقة |
39.7 |
39.7 |
Crane traveling |
71 |
71 |
||
رفع |
7.9 |
7.2 |
||
الطبقة العاملة |
/ |
ISO M5 |
ISO M5 |
|
إمدادات الطاقة |
V/هرتز |
380v, 3phase, 50hz |
380v, 3phase, 50hz |
|
Trolley traveling power |
KW |
4 |
4 |
|
Crane traveling power |
2*6.3 |
2*6.3 |
||
رفع الطاقة |
26 |
26 |
||
مجموع الطاقة |
42.6 |
42.6 |
||
Total Crane Weight |
t |
20.95 |
22.14 |
|
Max crane wheel load |
KN |
153 |
153 |
|
فئة الحماية |
/ |
ح |
ح |
|
Insulation class |
/ |
IP54 |
IP54 |
|
Working temperature |
/ |
-20℃ ~ +50℃ |
-20℃ ~ +50℃ |
|
الصلب |
/ |
Q235B |
Q235B |
|
Country of Origin |
/ |
الصين |
الصين |
ملاحظة: Recommended Crane Rail Specification (not included in quotation)
نوع |
أعلى العرض(مم) |
أسفل العرض(مم) |
الارتفاع(مم) |
الوزن(كجم/م) |
P43 |
70 |
114 |
140 |
44.65 |
(الصورة أعلاه هي للإشارة إلى رافعة نموذج فقط)
The double girder grab overhead crane fetching device is a grab bucket that can grab bulk materials. The double girder grab bridge crane has an opening and closing mechanism and a hoisting mechanism, and the grab is suspended on the opening and closing mechanism and the hoisting mechanism with four wire ropes respectively. The opening and closing mechanism drives the grab bucket to close and grab the material. When the bucket mouth is closed, the hoisting mechanism is started immediately, so that the four steel wire ropes are evenly loaded for hoisting work. When unloading, only the opening and closing mechanism is activated, and the bucket mouth is opened immediately to tilt the material. Except for the different lifting mechanism, the rest of the structure of the grab bridge crane is basically the same as that of the هوك bridge crane.
Application of double girder grab bridge crane:
1. Double-girder grab bridge cranes are widely used in power plants, freight yards, workshops, docks, coal stations, etc. for the loading and unloading of bulk materials.
2. Double-girder grab cranes are strictly prohibited to be used in flammable and explosive environments. If there are special needs for use, non-standard design can be customized.
3. All mechanisms of the grab bridge crane are operated in the cab, and the directions for entering the platform door of the cab are: end entry, side entry and top entry.
4. The grapple crane is equipped with a grab bucket, and the style and model specification of the grab bucket can be selected according to the needs of use.
5. The opening direction of the grab is parallel and vertical. The grabbing device is a four-rope grab with double drums, which is simple in structure and reliable in operation. The grab can be opened and closed at any height. When the grabbing material particles are less than 100mm, the effect is good and the production efficiency is high. When the grabbed particles are 200mm large, a toothed grab is required.
لقد مرت منتجاتنا CE (ECM) و شهادات ISO و يمكنك أيضا تحديد طرف ثالث وكالة لاختبار الجودة. رسوم اختبار طرف ثالث لم يتم تضمينها في هذا العرض.
تصميم و بناء قواعد
جميع المعايير المطلوبة من أجل الرافعات FEM معيار DIN القياسية القياسية الوطنية الصينية.
أوروبا الرئيسية المعايير الوطنية
— 89/392/EEC معيار (93/68/EEC)
— 91/368/EEC معيار
— 73/23/سي القياسية
— "EMC" المعيار 89/336/EEC
— EN 60204-1
— EN 292 السلامة الميكانيكية
— ISO 2141
— ISO 2766
المعايير الدولية
— 9 يونيو 1993 / سبتمبر. 22, 1993 إشعار
— 29 يوليو عام 1992 ، 92-765, 92-766, 92-767 إشعار
الدين 5684
الدين 15400; الدين 15401
— التعليم غير الرسمي 26-010
— التعليم غير الرسمي 26-030
المعايير التقنية
— فيم 9.511 المجموعة الميكانيكية
— فيم 9.661 الرفع و السفر مكونات الحجم و الجودة القياسية
— فيم 9.671 سلك حبل معايير الجودة
— فيم 9.681 السفر موتور الاختيار
— فيم 9.682 رفع السيارات الاختيار
— فيم 9.755 الكهربائية معدات الرفع
— فيم 9.811 الكهربائية الرافعة القياسية
— فيم 9.901 الرفع مكونات التصميم المرجعي
— IEC 34-1 السفر وتخصيص الأداء
— IEC 34-5 حماية الصف القياسية
— IEC 947-5-1 المعدات ذات الجهد المنخفض
الصين الرئيسي المعايير الوطنية
تصميم قواعد الرافعات GB/T 3811-2008
قواعد السلامة رفع الأجهزة GB 6067-2010
المشتركة رافعة حالة فنية GB 7592-87
رافعة-النفقات العامة السفر رافعات بوابة جسر الرافعة
التحمل لتصنيع المسارات وضع GB/T 10183-2010
رافعة-رمز اختبار والإجراءات GB/T 5905-2011
العامة جسر الرافعة GB/T 14405-2011
بوابة رافعة GB/T 14406-2011
رافعة معدات رفع الأداء الفني والقبول شرط GB/T 17908-1999
التركيبات الكهربائية و قبول القياسية GBJ 232-82
سلامة الآلات – المعدات الكهربائية من آلات
الجزء 32: متطلبات آلات الرفع GB 5226.2-2002
التركيبات الكهربائية و قبول معيار GB 50256-96
نحن رافعة المصنعة located in China, providing crane customization services to global crane customers. If you want to customize a Overhead Crane, you can leave a message on the website or email, tell us the following information, and our sales manager will contact you: