We completed the installation project of 1 fixed type kerekan rantai listrik in the Filipina. This is a 2 ton electric chain hoist, sent from Tianjin port to Manila port by sea
Kapasitas angkat | t | 2 |
Mengangkat tinggi | m | 3 |
Chain length | m | 6 |
Kecepatan angkat | m / mnt | 3.3 |
Chain diameter | mm | 7.1 |
Chain falls | / | 2 |
Kelas pekerja | / | A3 |
Catu daya | V / Hz / P | 380/50/3 |
Control voltage | 36 | |
Hoisting power | 1.5 | |
Motor revolving speed | r / min | 1440 |
Braking method | / | side magnetic braking system |
Berat total | kg | 78 |
Protection class | / | IP54 |
Insulation grade | / | F |
Suhu sekitar | / | -20℃-+40℃ |
Country of origin | / | China |
mm | H | A | B | D | E | I | J | K | L | M | N |
835 | 520 | 260 | 300 | 236 | Φ47 | 38 | Φ47 | 38 | 30 | 30 |
Produk kami telah lulus Sertifikasi CE (ECM) dan ISO, dan Anda juga dapat menentukan agen pihak ketiga untuk pengujian kualitas. Biaya pengujian pihak ketiga tidak termasuk dalam penawaran ini.
Aturan Desain dan Konstruksi
All the standards required for the cranes are the FEM standard, DIN standard and Chinese National standard.
Standar Nasional Utama Eropa
-- 89/392/EEC standard (93/68/EEC)
-- 91/368/EEC standard
-- 73/23/CEE standard
-- "EMC" standard 89/336/EEC
-- EN 60204-1
-- EN 292 mechanical safety
-- ISO 2141
-- ISO 2766
Standar Internasional
-- June 9, 1993 / Sept. 22, 1993 notice
-- July 29, 1992, 92-765, 92-766, 92-767 notice
-- DIN 5684
-- DIN 15400; DIN 15401
-- NFE 26-010
-- NFE 26-030
Standar Teknis
-- FEM 9.511 Mechanical group
-- FEM 9.661 Hoisting and traveling components size and quality standard
-- FEM 9.671 Wire rope quality standard
-- FEM 9.681 Travel motor choice
-- FEM 9.682 Hoisting motor choice
-- FEM 9.755 Electric hoisting equipment
-- FEM 9.811 Electric crane standard
-- FEM 9.901 Hoisting components design reference
-- IEC 34-1 Traveling and allocation performance
-- IEC 34-5 Protection grade standard
-- IEC 947-5-1 Low voltage equipment
Standar Nasional Utama China
Aturan desain untuk derek GB / T 3811-2008
Aturan keselamatan untuk peralatan pengangkat GB 6067-2010
Kondisi teknis derek umum GB 7592-87
Crane-Overhead travelling crane and portal bridge crane
toleransi untuk pembuatan dan peletakan trek GB/T 10183-2010
Kode dan prosedur uji derek GB / T 5905-2011
General Bridge crane GB/T 14405-2011
Portal Crane GB / T 14406-2011
Kinerja Teknis Peralatan Derek & Angkat dan Kondisi Penerimaan GB/T 17908-1999
Instalasi listrik dan standar penerimaan GBJ 232-82
Safety of Machinery - Electrical Equipment of Machines
Bagian 32: Persyaratan untuk mesin pengangkat GB 5226.2-2002
Instalasi listrik dan standar penerimaan GB 50256-96
Kami adalah produsen derek located in China, providing crane customization services to global crane customers. If you want to customize a kerekan listrik, you can leave a message on the website or Email: sales010@cranesdq.com , beri tahu kami informasi berikut, dan manajer penjualan kami akan menghubungi Anda: