Single-girder overhead cranes are widely used in factories in Pakistan, which can effectively reduce the labor intensity of workers and increase the production efficiency of the factory. As the overhead crane is a large-scale mechanical equipment, during the design process, it is necessary to make corresponding customized adjustments according to the factory's workshop conditions and work content. Today we share a case of an overhead crane from a sandwich panel factory in Pakistan
Our sales manager communicated with the customer, and from the customer we learned about the customer’s work requirements for cranes.
During the sandwich panel production, they need to move coils of steel sheet for stocking and for placing them in a continuous production line for EPS sandwich panel. Here comes the question: The factory has been built up within the wall with the height around 1.2 m which limits the working area of material handling. In order make the most of the working space, the client requires that the bucket should be set up closely against the wall. How to realize these requirements? See our solution diagram below:
Based on the working conditions and lifting requirements, we recommended the Pakistan client the 10 ton single girder overhead crane, with a special designed bucket, at the corners the foundations of which are narrowed down to 1/4 of the normal size and special materials and additional bolts are used to ensure the stability and safety (Seen the designing drawing above).
The bucket and bolts for the single girder overhead crane
The single girder overhead crane can help the client to lift and move the coil of steel plates and the specially designed foundation can largely save space for the crane. At same time, the safety and stability of the overhead crane is guaranteed. The lifting requirements of the client are perfectly satisfied.
Single girder overhead crane drawing
10 ton overhead crane with steel structure workshop
After the confirming of the crane drawing, everything went well with the crane production, packaging and delivery and installation.
We provide detailed installation instruction, including mechanism and electric, it’s easy for customer if they choose to install it by themselves. We can also provide installation guide by phone or email or other communication tools if customer request.
Kami adalah produsen derek terletak di Cina, menyediakan layanan penyesuaian derek untuk pelanggan derek global. Jika Anda ingin menyesuaikan derek di atas kepala, Anda dapat meninggalkan pesan di situs web atau mengirim email kepada kami: sales010@cranesdq.com, beri tahu kami informasi berikut, dan manajer penjualan kami akan menghubungi Anda:
Indonesian 
English 
Spanish 
Japanese 
French 
Thai 
Russian 
Vietnamese 
Arabic