We have completed 1 installation project of double girder bridge crane in the Filipina. Ini adalah derek di atas kepala 15 ton model QDX, Shipping from Qingdao port to Cagayan De Oro port. The hoisting mechanism uses a low headroom hoist, and the hoist performance adopts High performance European standard low headroom wire rope hoist with electric trolley, working class FEM 2M, Insulation grade: F, Protection class: IP54
Catatan:
For supervision on installation, client will cover round air tickets, visa application fee, meals, boarding and local transportation. If quarantine is needed in the Philippines, client will be responsible for fees incurred from it.
| Kapasitas angkat | t | 15 | ||
| Mengangkat tinggi | m | 6 | ||
| Rentang | m | 8.5 | ||
| Kecepatan | Kecepatan lintas perjalanan | m / mnt | 5.0-20 (inverter control) | |
| Kecepatan perjalanan derek | 10-40 (inverter control) | |||
| Kecepatan angkat | 0.8/5.0 (dual speed) | |||
| Kelas pekerja | / | FEM2M (ISOM5) | ||
| Catu daya | V / Hz / Ph | 440/60/3 | ||
| Cross bepergian kekuatan | KW | 0.75*2 | ||
| Crane traveling power | 1.5*2 | |||
| Mengangkat kekuatan | 2.6/16 | |||
| Total daya | 20.4 | |||
| Beban roda maks | KN | 97.4 | ||
| Total design weight | Kg | 6300 | ||
| Kelas perlindungan | / | IP54 | ||
| Insulation grade | / | F | ||
| Ambient temperatur | / | -10℃~+40℃ | ||
| Sistem anti-tabrakan | / | Termasuk | ||
| Phase protection relays | / | Termasuk | ||
| Sakelar batas | / | Termasuk | ||
| Perangkat Pelindung Tegangan Rendah | / | Termasuk | ||
| Tindakan penghentian darurat | / | Termasuk | ||
| Perlindungan gangguan tanah | / | Termasuk | ||
| Perlindungan hubung singkat | / | Termasuk | ||
| Perlindungan pemanasan berlebih | / | Termasuk | ||
| Perlindungan mematikan daya | / | Termasuk | ||
| Perlindungan arus berlebih | / | Termasuk | ||
| Pelindung kelebihan beban | / | Termasuk | ||
| Penyangga Kualitas Terbaik | / | Termasuk | ||
| Cross Power | / | C Track Festoon Kabel | ||
| Negara asal | / | Cina | ||
Recommended Crane Rail Specification (not included in this offer)
| Jenis | Lebar Atas (mm) | Lebar Bagian Bawah (mm) | Tinggi (mm) | Berat(kg / m) |
| P30 | 60.33 | 107.95 | 107.95 | 30.1 |
(Gambar di atas hanya untuk referensi model derek)
European-spec Double Girder Overhead Crane has advanced technology and is designed in accordance with international standards: DIN (Jerman), FEM (Europe), ISO (International). It has the advantages of strong rigidity, light weight and outstanding structural design, which can effectively save plant space and Investment cost, unique walking structure characteristics, is your best choice.
European-spec Double Girder Overhead Crane is widely used in workshops, warehouses and other material handling occasions in machinery manufacturing, metallurgy, petroleum, petrochemical, ports, railways, civil aviation, electric power, food, paper, building materials, electronics and other industries. It is especially suitable for material handling, precision assembly of large parts and other occasions that require precise positioning, and the working environment temperature is -25-40 ℃.
European-style double-girder bridge cranes are intelligent equipment, and a variety of functional interfaces are reserved to make function expansion easier;
The European-style double-girder bridge crane has more reliable performance and lower failure rate, which can reduce the cost of use and post-maintenance, and the service cycle can be as long as go years, without worries. Single girder cranes usually refer to derek overhead girder tunggal. The main beam of the single-girder crane bridge is mostly made of I-shaped steel or a combined section of steel and steel plates. Lifting trolleys are often assembled with chain hoists, kerekan listrik or hoists as lifting mechanism components.
The European-style double-girder overhead crane has advanced control technology and high-quality key components, which can ensure that the overall performance of the crane is more reliable, the crane starts and runs smoothly, without impact, and has a good mute effect, which can reduce the harm of noise. Single girder cranes usually refer to single girder overhead cranes. The main beam of the single-girder crane bridge is mostly made of I-shaped steel or a combined section of steel and steel plates. Lifting trolleys are often assembled with chain hoists, electric hoists or hoists as lifting mechanism components.
Produk kami telah lulus Sertifikasi CE (ECM) dan ISO, dan Anda juga dapat menentukan agen pihak ketiga untuk pengujian kualitas. Biaya pengujian pihak ketiga tidak termasuk dalam penawaran ini.
Aturan Desain dan Konstruksi
Semua standar yang disyaratkan untuk crane adalah standar FEM, standar DIN, dan standar Nasional China.
Standar Nasional Utama Eropa
-- 89/392/EEC standard (93/68/EEC)
-- 91/368/EEC standard
-- 73/23/CEE standard
-- "EMC" standard 89/336/EEC
-- EN 60204-1
-- EN 292 mechanical safety
-- ISO 2141
-- ISO 2766
Standar Internasional
-- 9 Juni 1993 / Sept. 22. pemberitahuan tahun 1993
-- Pemberitahuan 29 Juli 1992, 92-765, 92-766, 92-767
-- DIN 5684
-- DIN 15400; DIN 15401
-- NFE 26-010
-- NFE 26-030
Standar Teknis
-- Grup mekanik FEM 9.511
-- FEM 9.661 Mengangkat dan memindahkan komponen ukuran dan standar kualitas
-- Standar kualitas tali kawat FEM 9.671
-- Pilihan motor travel FEM 9.681
-- FEM 9.682 Pilihan motor pengangkat
-- Peralatan pengangkat listrik FEM 9.755
-- Standar derek listrik FEM 9.811
-- Referensi desain komponen pengangkat FEM 9.901
-- IEC 34-1 Kinerja perjalanan dan alokasi
-- Standar tingkat perlindungan IEC 34-5
-- Peralatan tegangan rendah IEC 947-5-1
Standar Nasional Utama China
Aturan desain untuk derek GB / T 3811-2008
Aturan keselamatan untuk peralatan pengangkat GB 6067-2010
Kondisi teknis derek umum GB 7592-87
Derek-Derek perjalanan di atas kepala dan derek jembatan portal
toleransi untuk pembuatan dan peletakan trek GB/T 10183-2010
Kode dan prosedur uji derek GB / T 5905-2011
Derek Jembatan umum GB/T 14405-2011
Portal Crane GB / T 14406-2011
Kinerja Teknis Peralatan Derek & Angkat dan Kondisi Penerimaan GB/T 17908-1999
Instalasi listrik dan standar penerimaan GBJ 232-82
Keselamatan Mesin-Peralatan Listrik Mesin
Bagian 32: Persyaratan untuk mesin pengangkat GB 5226.2-2002
Instalasi listrik dan standar penerimaan GB 50256-96
Kami adalah produsen derek terletak di Cina, menyediakan layanan penyesuaian derek untuk pelanggan derek global. Jika Anda ingin menyesuaikan Derek di Atas Kepala, Anda dapat meninggalkan pesan di situs web atau Email: sales010@cranesdq.com, beri tahu kami informasi berikut, dan manajer penjualan kami akan menghubungi Anda:
Anda dapat mengisi formulir kontak atau mengirimkan email kepada kami. Setelah menerima pertanyaan Anda, kami akan menghubungi Anda sesegera mungkin dan memberi Anda penawaran yang sesuai.
Indonesian 
English 
Spanish 
Japanese 
French 
Thai 
Russian 
Vietnamese 
Arabic