Installation of 5 ton overhead crane for Peshawar, Pakistan

InicioLos casosGrúa de arriba de los casos → Installation of 5 ton overhead crane for Peshawar, Pakistan

Installation of 5 ton overhead crane for Peshawar, Pakistan

We have more than ten years of crane service experience in Pakistán, today we share a case of 5 tonelada grúa de arriba installation from Peshawar, Pakistan.

Design overhead crane process for Pakistani customers

When communicating with the customer, the customer put forward the following requirements for the overhead crane:

  • Lifting capacity:5tons
  • Lifting height:4m
  • Span:8.2m
  • Power:400v,50hz,3phase

At the same time, the customer proposed that the motor should use a world-class brand, the track should use square steel rail, and the height from the load-bearing beam to the roof, as well as the working requirements and working frequency were proposed.

After researching all the customer's requirements, we made the following design for the customer:

European overhead crane drawings for Pakistan

European overhead crane drawings

Why design European single girder overhead cranes for customers

  • Low clearance, small dimension
  • Light dead weight.
  • Provide more effective working space
  • Importing configuration, ABM motor, Schneider electrics , Schneider inverter, TIMKEN Estados UNIDOS bearing, GG Italia pendent controller and Francia wire rope etc.
  • Double lifting speed and inverter traveling speed

As the customer require the crane urgently also, so we arranged the production right after the acceptance of the official letter of credit. With the cooperation of Sales Department, Technical Department, Production Department and Quality Testing Department, we finished the production of the de una sola viga de grúa de arriba in 20 days, which makes the customer very satisfied.

Production and installation of 5 ton single girder overhead crane

According to our company standard, we packaged the hoist and other electrics parts by wooden box, girders by plastic bags.

As the overhead crane will be delivered by 40ft container. So in order to protect the crane damaged from the shaking during the shipment, so we fixed the crane by wire rope also.

5 ton overhead crane in China crane factory

5 ton overhead crane in China grúa de fábrica

5 ton overhead crane in China crane factory

Trolley hoist in China grúa de fábrica

5 ton single girder overhead crane is packed and ready to be sent to Pakistan

5 ton single girder overhead crane is packed and ready to be sent to Pakistan

Customer installed the crane by themselves according to our installations specifications and electrics drawings.During the installations, they have little difficulty in connecting the hoist electrics, so we offered our electrics engineer’s mobile soon, and let them talked directly.Finally, they finished the installations successfully, and happily sent the installation pictures to us.

The others 5 ton overhead crane case in Pakistan

Cómo personalizar la Grúa de arriba de China

Somos un fabricante de grúas encuentra en China, proporcionando grúa servicios de personalización global de la grúa clientes. Si desea personalizar una Grúa, usted puede dejar un mensaje en el sitio web o Correo electrónico: sales010@cranesdq.com, nos diga la siguiente información, y nuestro gerente de ventas se pondrá en contacto con usted:

  • Capacidad de elevación (ton): __ ?( La capacidad nominal)
  • Altura de elevación (m):__ ? (Altura de gancho centro para el piso)
  • Span (m): __ ? (La distancia entre el centro del ferrocarril)
  • Velocidad de elevación (m/min): __ ? ( Simple, Doble, Variable)
  • La distancia de desplazamiento (m): __ ? (La longitud del carril)
  • El trabajo deber: __ ? (¿Cuántas horas al día? Cuántas veces en una hora?)
  • ¿De qué material a ser levantado: __ ?
  • Industrial de tensión: __ ? ( como :380V, 50Hz, 3ph )

Deja un comentario

Protegido con Lista Negra de IP en la NubeLista Negra de IP en la Nube

Enviar A Tus Necesidades

    es_ESSpanish
    %d