Installation of 5 ton overhead crane for Peshawar, Pakistan

AccueilCasPont roulant cas → Installation of 5 ton overhead crane for Peshawar, Pakistan

Installation of 5 ton overhead crane for Peshawar, Pakistan

We have more than ten years of crane service experience in Pakistan, today we share a case of Pont roulant de 5 tonnes installation from Peshawar, Pakistan.

Design overhead crane process for Pakistani customers

When communicating with the customer, the customer put forward the following requirements for the overhead crane:

  • Lifting capacity:5tons
  • Lifting height:4m
  • Span:8.2m
  • Power:400v,50hz,3phase

At the same time, the customer proposed that the motor should use a world-class brand, the track should use square steel rail, and the height from the load-bearing beam to the roof, as well as the working requirements and working frequency were proposed.

After researching all the customer's requirements, we made the following design for the customer:

European overhead crane drawings for Pakistan

European overhead crane drawings

Why design European single girder overhead cranes for customers

  • Low clearance, small dimension
  • Light dead weight.
  • Provide more effective working space
  • Importing configuration, ABM motor, Schneider electrics , Schneider inverter, TIMKEN États-unis bearing, GG Italie pendent controller and France wire rope etc.
  • Double lifting speed and inverter traveling speed

As the customer require the crane urgently also, so we arranged the production right after the acceptance of the official letter of credit. With the cooperation of Sales Department, Technical Department, Production Department and Quality Testing Department, we finished the production of the pont roulant monopoutre in 20 days, which makes the customer very satisfied.

Production and installation of 5 ton single girder overhead crane

According to our company standard, we packaged the hoist and other electrics parts by wooden box, girders by plastic bags.

As the overhead crane will be delivered by 40ft container. So in order to protect the crane damaged from the shaking during the shipment, so we fixed the crane by wire rope also.

5 ton overhead crane in China crane factory

5 ton overhead crane in China grue d'usine

5 ton overhead crane in China crane factory

Trolley hoist in China grue d'usine

5 ton single girder overhead crane is packed and ready to be sent to Pakistan

5 ton single girder overhead crane is packed and ready to be sent to Pakistan

Customer installed the crane by themselves according to our installations specifications and electrics drawings.During the installations, they have little difficulty in connecting the hoist electrics, so we offered our electrics engineer’s mobile soon, and let them talked directly.Finally, they finished the installations successfully, and happily sent the installation pictures to us.

The others 5 ton overhead crane case in Pakistan

Comment personnaliser un pont roulant de la Chine

Nous sommes un fabricant de la grue située en Chine, fournissant grue de personnalisation de services aux clients de grues. Si vous souhaitez personnaliser un pont roulant, vous pouvez laisser un message sur le site ou E-mail: sales010@cranesdq.com, dites-nous les informations suivantes, et notre directeur des ventes communiquera avec vous:

  • Capacité de levage (t): __ ?( La capacité nominale)
  • Hauteur de levage (m):__ ? (Hauteur de crochet centre à l'étage)
  • Span (m): __ ? (La Distance entre le rail du centre)
  • Vitesse de levage (m/min): __ ? ( Simple, Double, Variable)
  • Voyager distance (m): __ ? (La longueur du rail)
  • Travail duty: __ ? (Combien d'heures par jour? Combien de fois par heure?)
  • Quel matériel pour être soulevé: __ ?
  • Industriel de tension: __ ? ( comme :380V, 50Hz, 3ph )

Laisser un commentaire

Protégé avec IP Blacklist CloudIP Blacklist Cloud

Envoyer À Vos Besoins

    fr_FRFrench
    %d