Installation of 5 ton overhead crane for Peshawar, Pakistan

HomeKasusKasus derek di atas kepala → Installation of 5 ton overhead crane for Peshawar, Pakistan

Installation of 5 ton overhead crane for Peshawar, Pakistan

We have more than ten years of crane service experience in Pakistan, today we share a case of 5 ton overhead crane installation from Peshawar, Pakistan.

Design overhead crane process for Pakistani customers

When communicating with the customer, the customer put forward the following requirements for the overhead crane:

  • Lifting capacity:5tons
  • Lifting height:4m
  • Span:8.2m
  • Power:400v,50hz,3phase

At the same time, the customer proposed that the motor should use a world-class brand, the track should use square steel rail, and the height from the load-bearing beam to the roof, as well as the working requirements and working frequency were proposed.

After researching all the customer's requirements, we made the following design for the customer:

European overhead crane drawings for Pakistan

European overhead crane drawings

Why design European single girder overhead cranes for customers

  • Low clearance, small dimension
  • Light dead weight.
  • Provide more effective working space
  • Importing configuration, ABM motor, Schneider electrics , Schneider inverter, TIMKEN Amerika Serikat bearing, GG Italia pendent controller and Prancis wire rope etc.
  • Double lifting speed and inverter traveling speed

As the customer require the crane urgently also, so we arranged the production right after the acceptance of the official letter of credit. With the cooperation of Sales Department, Technical Department, Production Department and Quality Testing Department, we finished the production of the derek overhead girder tunggal in 20 days, which makes the customer very satisfied.

Production and installation of 5 ton single girder overhead crane

According to our company standard, we packaged the hoist and other electrics parts by wooden box, girders by plastic bags.

As the overhead crane will be delivered by 40ft container. So in order to protect the crane damaged from the shaking during the shipment, so we fixed the crane by wire rope also.

5 ton overhead crane in China crane factory

5 ton overhead crane in China pabrik derek

5 ton overhead crane in China crane factory

Trolley hoist in China pabrik derek

5 ton single girder overhead crane is packed and ready to be sent to Pakistan

5 ton single girder overhead crane is packed and ready to be sent to Pakistan

Customer installed the crane by themselves according to our installations specifications and electrics drawings.During the installations, they have little difficulty in connecting the hoist electrics, so we offered our electrics engineer’s mobile soon, and let them talked directly.Finally, they finished the installations successfully, and happily sent the installation pictures to us.

The others 5 ton overhead crane case in Pakistan

Cara menyesuaikan Derek di Atas Kepala dari China

Kami adalah produsen derek yang berlokasi di Cina, menyediakan layanan penyesuaian derek kepada pelanggan derek global. Jika Anda ingin menyesuaikan Derek di Atas Kepala, Anda dapat meninggalkan pesan di situs web atau Email: sales010@cranesdq.com, beri tahu kami informasi berikut, dan manajer penjualan kami akan menghubungi Anda:

  • Kapasitas angkat (ton):__?(Kapasitas terukur)
  • Tinggi angkat (m):__? (Tinggi dari hook pusat ke lantai)
  • Rentang (m):__? (Jarak antara pusat rel)
  • Kecepatan angkat (m / mnt):__? (Tunggal, Ganda, Variabel)
  • Jarak tempuh (m):__? (Panjang rel)
  • Tugas kerja:__? (Berapa jam sehari? Berapa kali dalam satu jam?)
  • Bahan apa yang akan diangkat:__?
  • Tegangan industri:__? ( seperti: 380V, 50Hz, 3ph )

Leave a Reply

Dilindungi dengan Cloud Daftar Hitam IPCloud Daftar Hitam IP

Kirimkan Kebutuhan Anda

    id_IDIndonesian
    %d